Labour Day Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: suredis

Huawei H35-210 HCIA-Access V2.0 Exam Practice Test

Page: 1 / 33
Total 328 questions

HCIA-Access V2.0 Questions and Answers

Testing Engine

  • Product Type: Testing Engine
$42  $119.99

PDF Study Guide

  • Product Type: PDF Study Guide
$36.75  $104.99
Question 1

(single) When the MA5600T/MA5603T device needs to be maintained and managed locally, the baud rate setting of the maintenance terminal HyperTerminal must be thesame as the serial baud rate parameter of the MA5600T/MA5603T system. What is the default serial port baud rate of the system?

Options:

A.

9600bit/s

B.

19200bit/s

C.

38400bit/s

D.

115200bit/s

Question 2

(single) According to the provisions of the H.248 protocol, what type of terminal does the telephone terminal occupy when it goes off-hook?

Options:

A.

Semi-permanent terminal

B.

Persistent terminal

C.

Permanent terminal

D.

Temporary terminal

Question 3

(single) 1:2 What is the attenuation of the splitter?

Options:

A.

5db

B.

8db

C.

3db

D.

13db

Question 4

(multiple) Which of the following are not features of smart vlan?

Options:

A.

There are two types of ports: uplink port and service virtual port.

B.

A Smart VLAN can contain multiple uplink ports and multiple service virtual ports.

C.

Layer 2 interworking between service flows between service virtual ports in the same VLAN

D.

Smart VLAN is mainly used to distinguish users, one VLAN per user.

Question 5

(single) By default, how many multicast programs can be viewed by each multicast user under the MA5680T at the same time?

Options:

A.

2

B.

4

C.

8

D.

16

Question 6

(single) MA5600 supports ADSL2+. Which of the following is incorrect about ADSL2+?

Options:

A.

Themaximum downstream speed is 24Mbit/s

B.

The maximum reachable distance is 6.5km

C.

Use high frequency band, subchannel (32-511) and subchannels above 512.

D.

Spectrum bandwidth is 1.104MHz

Question 7

(single) Which of the following isincorrect for the expression of ONT tcont?

Options:

A.

An ONU/ONT can contain multiple T-CONTs

B.

tcont 1 generally carries OMCI channels

C.

The upstream bandwidth is divided based on T-CONT, and different services use different T-CONTs.

D.

GEM port is used as a service channel. A GEM port can carry one or more services in the flow.

Question 8

(Single) The UA5000 narrowband main control board PVM and the broadband main control board IPM are connected to each other to provide voice services and broadband services. The voice service is transmittedto the IPM board through the internal IP channel, and then transmitted to the upper layer by the uplink interface of the IPM board. Network, which command should be used to configure the system networking mode?

Options:

A.

uplink tps on

B.

uplink tps off

C.

working mode integrated

D.

working mode alone

Question 9

(single) Which of the following symbols is used to indicate all terminals in the H.248 protocol?

Options:

A.

"*"

B.

"$"

C.

"-"

D.

"root"

Question 10

(single) What business does TCONT 0 generally run in the ONT?

Options:

A.

IPTV

B.

VoIP

C.

Internet

D.

OMCI

Question 11

(single) Is the following description correct? The OLT supports the direct copying of user packet priorities as the priority of forwarding packets. It also supports local setting ofpriorities directly on the OLT.

Options:

A.

True

B.

False

Question 12

(single) Is the following description correct? Triple Play refers to multiple different service access modes on one subscriber line.

Options:

A.

True

B.

False

Question 13

(single) In the EMU command line mode, different environment monitoring units are configured with different command keywords. Which keyword is used by the 4845/4875?

Options:

A.

POWER

B.

FAN

C.

ESC

D.

DIS

Question 14

In the GPON network, ONU_ID must be unique under the same PON port of the OLT.

Options:

A.

True

B.

False

Question 15

(single) In the EPON network, what management and maintenance channel does the OLT use to configure and maintain the terminal equipment?

Options:

A.

OAM

B.

DHCP

C.

OMCI

D.

SNMP

Question 16

(multiple) command. What are the correct meanings of the three points in ./.profile?

Options:

A.

The first point. Indicates execution, with sh

B.

The second point. Connected to the following /, / indicates the current directory

C.

Third point. Connected to the previous /, indicating the root directory

D.

The third point. Before the profile, the .profile is a file name, indicating hidden files.

Question 17

(single) 10BASE-T refers to which medium is defined?

Options:

A.

Thick coaxial cable

B.

Thin coaxial cable

C.

twisted pair

D.

Fiber

Question 18

(single) In the H.248 protocol, how to apply for gateway registration?

Options:

A.

MOD_REQ is sent by the MGto the MGC

B.

MOD_REQ is sent by the MGC to the MG

C.

SVC_CHG_REQ is sent by the MG to the MGC

D.

SVC_CHG_REQ is sent by the MGC to the MG

Question 19

(single) Is the following description correct? When creating an ADSL line configuration template, the MA5600T can specify the template number or not. If not specified, the system automatically assigns the smallest idle template number.

Options:

A.

True

B.

False

Question 20

(single) What isthe maximum transmission distance of SHDSL?

Options:

A.

1.5KM

B.

6KM

C.

10KM

D.

20KM

Question 21

(multiple) All H.248 commands must be sent back by the receiver. What are the following messages that can be used to respond?

Options:

A.

reply

B.

pending

C.

ack

D.

complete

Question 22

(Single) Is the following description correct? The method of determining whether the received broadcast frame is received by the computer in the local area network is to determine whether the source MAC address of the frame is the same as the hardware address of the local machine.

Options:

A.

True

B.

False

Question 23

(single) The MA5600T checks whether the version of the currently running board software meets the requirements for on-site deployment. Which command is used?

Options:

A.

display language

B.

display board

C.

display version

D.

All of the above can

Question 24

(single) By default, which type of queue is the queue scheduling mode on the OLT?

Options:

A.

WRR

B.

PQ

C.

WFQ

D.

CQ

Question 25

(single) Where is the H.248 protocol used for?

Options:

A.

Between MGC and MGC

B.

MG and MG

C.

between MGC and MG

Between D.MG and Swich

Question 26

(single) Is the following description correct? The traffic-table on the OLT can not only set the parameters of the traffic rate limit, but also support the setting of the priority policy.

Options:

A.

True

B.

False

Question 27

(single) Is the following description correct? VDSL2 provides uplink and downlink symmetric/asymmetric transmission rates on a pair of twisted pairs, with a transmission distance of about 3 km, a maximum downlink rate of 52 M (symmetric rate), and a maximum uplink rate of 12 M (asymmetric rate).

Options:

A.

True

B.

False

Question 28

(single) Is the following description correct? The goal of ATM, the biggest feature of ATM, is to achieve optimal network resource utilization for any formof service distribution. To achieve this goal, statistical reuse of network resources is required.

Options:

A.

True

B.

False

Question 29

(single) Is the following description correct? In the classification of acceptance test items, the basic package is used to ensure the normal operation of equipment and network basic services and functions, and it is only necessary to use simple or cheap instruments to meet the acceptance test items.

Options:

A.

True

B.

False

Question 30

(single) What are the management protocols running between the OLT and the ONT in the EPON network?

Options:

A.

OMCI

B.

SNMP

C.

OAM

D.

IGMP

Question 31

(single) Is the following description correct? The MA5600 uses the service-port command to create an xDSL service flow. The service flow is classified into singleservice and multiple services. If you select single-service or do not enter multi-service, the default is single service.

Options:

A.

True

B.

False

Question 32

(multiple) IPMB is the broadband control board of the UA5000. What are itsmain functions?

Options:

A.

Used to aggregate and process broadband services (ADSL, VDSL, SHDSL, LAN)

B.

Forward the VoIP service of the PVM board and implement IP uplink through the FE or GE interface.

C.

Provides broadband switching resources and has dual-systemhot backup function, supporting active/standby switching.

D.

Support multicast services, providing a dedicated multicast channel.

Question 33

(single) Is the following description correct? Fast Ethernet speed standards are 100Base-TX, 100Base-T4, and 100Base-FX.

Options:

A.

True

B.

False

Question 34

In order to realize the user-level traceability of Internet services, as well as more fine-grained user and business QoS control and management, PUPSPV (per user per business per VLAN) of Internet services is planned. The recommended VLAN attribute for SVLAN on the OLT is __?

Options:

A.

Smart

B.

Normal

C.

QinQ

D.

Stack

Question 35

(single) Is the following descriptioncorrect? The DC upgrade tool requires the license. If there is no license, the default can be 30 concurrently. If there is a license, the maximum can be 60 concurrent.

Options:

A.

True

B.

False

Question 36

(single) Which of the following is correct in the GPON network?

Options:

A.

Different T-CONT with Port-ID identification

B.

Different GEM-PORT with Alloc-ID logo

C.

Different ONUs use Port-ID identification

D.

Different ONUs are identified by ONU IDs

Question 37

(single) Which is the correct sorting of the loss of the fiber connection point?

Options:

A.

Active connection> Cold connection> Welding

B.

Active connection > fusion > cold junction

C.

Welding> Coldjunction> Active connection

D.

Cold junction>active connection>welding

Question 38

(single) Is the following description correct? The MA5600T/MA5680T supports VLAN tag conversion. When an SVLANwith different attributes creates a service flow through the service-port, if the tag-transform is set to default, the Tag conversion rule is the same.

Options:

A.

True

B.

False

Question 39

In the GPON network, there is a long-light emitting ONT, what impact will it have?

Options:

A.

All businesses are operating normally without impact

B.

Other ONTs under the same PON port are offline

C.

Other ONTs under the same OLT are offline

D.

All of the above

Question 40

(multiple) When the MA5600T is newly deployed and connected to the network management,what are the following descriptions correct?

Options:

A.

The IP address of the interface used by the A.MA5600T must be on the same network segment as the network management IP address.

B.

The SNMP version should be configured the same as the U2000 side.

C.

The configuration of reading the community name and the writing community name is the same as that of the network management side.

D.

Add a static route, the destination address is the network segment where the network management IP is located.

Question 41

What are the characteristics of (multiple) ATM cells?

Options:

A.

ATM cell is a fixed length of 53 bytes

B.

Divided into letterhead and payload

C.

The header is 5 bytes.

D.

The payload is 48 bytes.

Question 42

(multiple) What are the following aspects of the total loss of the ODN link?

Options:

A.

Splitter loss

B.

Welding and cold junction loss

C.

Connector, adapter (flange) loss

D.

Optical fiber transmission loss

Question 43

(single) Which of the following boards can provide 32 ADSL2+ interfaces and 32 POTS interfaces at the same time?

Options:

A.

A32

B.

ADRB

C.

CSRB

D.

ADRI

Question 44

(single) A part of the field in the IP packet is used to describe the lifetime of the packet, that is, the TTL value. What is the maximum value?

Options:

A.

255

B.

256

C.

1023

D.

1024

Question 45

(single) MA5600T/MA5680T one-pack loading mode can be uniformly loaded into the OLT device by grouping multiple files into onepackage file, which can greatly reduce the upgrade complexity of the OLT device. Which of the following options cannot be uniformly loaded by the unified package tool? ?

Options:

A.

Target version Main package

B.

Post-upgrade patch file

C.

Source version upgrade special patch

D.

Source version SPH/SPC patch

Question 46

(single) Which of the following is not part of the FTTH ODN network?

Options:

A.

Beam splitter

B.

ODF

C.

Fiber Box (FAT)

D.

ONU

Question 47

(single) Which type of Huawei GPON network optical module is mainly used?

Options:

A.

CLASS A

B.

CLASS B+

C.

CLASS B

D.

CLASS C

Question 48

(multiple) Which ICMP packets are used by the PING command?

Options:

A.

ICMP Echo Request message

B.

ICMP Echo Reply message

C.

ICMP timestamp request message

D.

ICMP address mask request message

Question 49

In the GPON system, which parameter must be bound to the DBA template to take effect?

Options:

A.

T-CONT

B.

GEM Port

ะก. PON port

C.

Business virtual port

Page: 1 / 33
Total 328 questions