Huawei H19-308_V4.0 HCSA-Presales-Storage V4.0 Exam Practice Test

Huawei OceanStor Pacific is a distributed scale-out storage system optimized for mass unstructured data (File, Object, HDFS). While it provides robust "always-on" service capabilities, Option A is incorrect as it refers to a specific feature of centralized unified storage arrays like the OceanStor Dorado series. OceanStor Dorado is marketed as providing the industry's only "Active-active solution for SAN and NAS" within a centralized architecture.

In contrast, OceanStor Pacific ensures service continuity through distributed mechanisms:

Fast Failover (Option B):Technologies such as multi-module concurrent service takeover enable services on a faulty node to be taken over within 10 seconds, minimizing RTO.

HyperGeoMetro (Option C):This feature provides multi-replica cross-site active-active protection for object storage, allowing data to be accessed and modified at multiple sites simultaneously.

HyperGeoEC (Option D): This is a cross-site Erasure Coding (EC) multi-active solution that provides high reliability and space utilization for large-scale deployments.

Because OceanStor Pacific is designed for distributed unstructured workloads rather than integrated SAN/NAS block-and-file convergence in the traditional sense, Option A is the outlier.

For "Safe City" projects involving massive video surveillance (such as 10,000+ camera streams), Huawei recommends the OceanStor Pacific series (distributed storage). Large-scale video surveillance generates immense volumes of unstructured data that must be written continuously and stored for long periods. A traditional centralized NAS or SAN often faces performance bottlenecks at the controller level when handling thousands of concurrent high-definition video streams.

OceanStor Pacific uses ascale-out architecturethat allows performance and capacity to scale linearly. For 10,000 cameras, the system can aggregate the bandwidth of dozens or hundreds of nodes, providing the high throughput required for video ingestion and the massive capacity required for long-term retention. Additionally, OceanStor Pacific supports high-ratio Erasure Coding (EC), which provides better disk utilization (up to 91%) than traditional RAID, significantly reducing the Total Cost of Ownership (TCO) for petabyte-scale surveillance archives.

Huawei’s HyperLock feature provides WORM (Write Once, Read Many) functionality for NAS file systems. When a file is placed in the WORM state, the storage system strictly enforces a policy where the file's data can be accessed and read by authorized users, but any attempt to modify, overwrite, or delete the file is blocked by the storage controller.

In the Huawei OceanStor system, a file enters the WORM state after it is "locked." Once locked, the file remains in a read-only state for a defined retention period. During this time, not even an administrator can modify the file's content or reduce its protection duration. This is critical for meeting regulatory compliance (such as SEC Rule 17a-4) and for protecting sensitive data against ransomware, as it ensures that once data is archived, it remains immutable and verifiable. Only after the retention period has expired can the file be deleted, though it can still never be modified.

Huawei OceanStor BCManager (Business Continuity Manager) is the dedicated software suite designed for managing disaster recovery and backup environments. While other tools perform different functions, BCManager is specifically engineered to orchestrate the entire DR lifecycle:

Management (eReplication):This component manages disaster recovery for various applications (like databases and VMs). It automates the recovery process, performs DR drills without interrupting services, and visualizes the DR topology.

Backup (eBackup):This component handles the backup of virtualized environments.

In contrast,DeviceManager (Option B)is the on-box management tool for single-array configuration.SystemReporter (Option A)is used for performance analysis and reporting.eService (Option D)is a cloud-based proactive monitoring and maintenance platform. Therefore, BCManager is the correct choice for specialized DR management.

This statement aligns with the market analysis provided in Huawei’s OceanStor Pacific pre-sales documentation regarding the "Yottabyte Era". Huawei highlights that the nature of data is shifting away from structured databases toward massive volumes of unstructured data, such as high-definition video, medical images, IoT sensor logs, and AI training datasets.

By 2025, it is projected that80% of new data generatedwill be unstructured. This trend is the primary driver behind the development of the OceanStor Pacific series, which is ascale-out distributed storagesystem specifically designed to handle the capacity and performance requirements of unstructured data at scale. Traditional centralized arrays (SAN/NAS) are often ill-equipped to handle the sheer volume and file counts associated with this growth, necessitating the move toward distributed architectures that can scale horizontally to hundreds of petabytes.

According to Huawei’s technical documentation on storage media, Solid State Drives (SSDs) fundamentally differ from Hard Disk Drives (HDDs) in their physical construction and data access methods. HDDs rely on mechanical components, including rotating platters and moving read/write heads. This mechanical nature introduces "rotational latency" and "seek time," which inherently limit the number of Input/Output Operations Per Second (IOPS).

In contrast, Huawei’s OceanStor SSDs utilize flash memory chips (NAND Flash) and a high-performance controller. Because there are no moving parts, the "seek time" is eliminated, allowing for near-instantaneous data access. This results in significantly higher random IOPS and much lower latency (often measured in microseconds rather than milliseconds). Furthermore, Huawei’sFlashLink® technologyfurther optimizes the collaboration between the storage controller and the SSDs, ensuring that even as the drive fills up, the performance remains consistent and the latency remains low. Therefore, in any performance-oriented storage environment, SSDs are the preferred choice over traditional HDDs.

Huawei distinguishes Scale-out Storage (OceanStor Pacific) from traditional Array Storage (Centralized SAN/NAS) based on its ability to handle the "Yottabyte Era" requirements of mass data.

Large Volume (Option A):While traditional arrays are limited by the number of controllers and disk enclosures they can address, scale-out storage is designed to aggregate thousands of nodes into a single global namespace, easily managing 10 PB or even EB-level data volumes.

TB-level Bandwidth (Option C):Distributed storage excels at throughput. By utilizing a high-speed interconnected network (InfiniBand or RoCE) and parallel access protocols like DPC, a scale-out cluster can deliver aggregate bandwidth in the range of TB/s, which is critical for HPC and big data analytics.

Elastic Scalability (Option D):Traditional arrays typically scale out to a few dozen controllers. OceanStor Pacific can scale out to 4,096 nodes in a single cluster, providing linear growth in both performance and capacity as nodes are added.

Performance in IOPS (Option B)is not adifferencein the sense that both systems provide IOPS; however, centralized all-flash arrays (Dorado) are often superior for low-latency, high-IOPS structured databases, whereas scale-out storage is primarily defined by its massive bandwidth and capacity scalability.

To meet the customer's requirement for departmental isolation and resource control, Huawei recommends the combination of Multi-tenancy (Option C) and Quotas (Option D).12

Multi-tenancyis the foundational feature for iso3lation in Huawei object storage. It allows the physical storage system to be logically partitioned into multip4le "Tenants". Each department can be assigned its own tenant environment with its own set of users, access keys, and buckets. Data is logically isolated, meaning one department cannot see or access the data of another unless explicitly permitted.

Quotamanagement is then used to limit the capacity consumed by each department. In Huawei OceanStor Pacific, quotas can be applied at the Tenant level or the Bucket level. By setting a Tenant Quota, the administrator ensures that a specific department does not exceed its allocated budget of storage space, preventing one department from exhausting the resources of the entire system. While Replication (Option A) and WORM (Option B) are valuable for data protection, they do not address the specific needs of departmental isolation and capacity limiting.

In Huawei’s object storage management (OceanStor Pacific), quotas are a critical administrative tool for resource governance. Option C is correct as quotas serve as a fundamental method for controlling how much of the physical resource pool a specific entity (tenant or user) can access and consume.

Option A and D are correctbecause Huawei supports bothTenant-levelandBucket-levelquotas. Once a Hard Quota limit is reached for a tenant or a specific bucket, the storage system will reject further write requests (PUT operations) to prevent exceeding the allocated budget.Option B is correctbecause the storage management system (DeviceManager or eSight) integrates with the quota system to trigger alarms when usage reaches predefined thresholds (such as 80% or 90%) or when the resource limit is reached, allowing administrators to take proactive measures like expanding the quota or cleaning up data.

According to the Huawei OceanStor Pacific series data sheet and reliability manuals, the system utilizes Elastic Erasure Coding (EC) for data redundancy protection. This technology is more efficient than traditional RAID and allows for higher levels of tolerance in a distributed environment.

Specifically, a single OceanStor Pacific storage system can be configured to tolerate the simultaneousfailure of up to four nodes(or four cabinets in a multi-cabinet deployment) without data loss or service interruption. When a node fails, the system automatically triggers a background reconstruction process to restore redundancy using the remaining healthy nodes. The flexibility of dynamic EC ratios (N+M) allows the system to adjust to these faults while maintaining optimal space utilization and reliability.

NVMe over Fabrics (NVMe-oF) using the RoCE v2 (RDMA over Converged Ethernet) protocol is a high-speed communication technology supported by Huawei OceanStor Dorado systems. Option B is correct because RoCE v2 utilizes RDMA, which allows data to be transferred directly from the memory of one computer to another without involving the CPU of either system. This significantly reduces latency and CPU overhead compared to traditional iSCSI.

Option C is correctbecause RoCE v2 requires a "Lossless Ethernet" environment to function correctly. Traditional Ethernet (Option A) is a "best-effort" delivery system that allows for packet drops during congestion; however, RDMA protocols are highly sensitive to packet loss. To support RoCE v2, the network must implement Data Center Bridging (DCB) features like Priority Flow Control (PFC) and Enhanced Transmission Selection (ETS) to ensure a zero-packet-loss environment. Regarding cost (Option D), RoCE v2 often leverages existing Ethernet infrastructure, making it generally more cost-effective than deploying a dedicated Fibre Channel (FC) fabric, which requires specialized HBAs and FC switches.

In Huawei OceanStor systems, a snapshot is not a full physical copy of the data. Huawei uses a technology called HyperSnap, which typically employs a "Copy-on-Write" (COW) or "Redirect-on-Write" (ROW) mechanism.

When a snapshot is created, the system generates a point-in-time (PIT) logical image of the source LUN. It does not immediately duplicate the data blocks; instead, it records the state of the data at that specific moment. If data in the source LUN is subsequently modified, the original data is preserved (in COW) or new data is written to a new location (in ROW) to maintain the integrity of the snapshot. Because only the metadata and the changed blocks are managed, snapshots are created near-instantaneously and consume very little initial space.

A "full copy" would be referred to as aClone (HyperClone)or aLUN Copy, both of which require a 1:1 ratio of physical storage space relative to the source and take significant time to complete. Therefore, a snapshot is a virtual, point-in-time image, not a full physical duplicate.

In the Huawei OceanStor RAID 2.0+ architecture, Redundant Array of Independent Disks (RAID) levels are used to balance performance, capacity, and reliability. RAID 0, also known as "striping," distributes data blocks across multiple physical disks to maximize I/O performance. By allowing multiple disks to be read or written simultaneously, it provides the highest throughput and capacity utilization (100%).

However, the defining characteristic of RAID 0 is the complete lack of redundancy. Unlike RAID 1 (Mirroring), RAID 5 (Parity), or RAID 6 (Dual Parity), RAID 0 does not store redundant information or parity bits. Huawei documentation explicitly states that if any single physical disk in a RAID 0 group fails, the entire RAID group becomes inaccessible, and all data within that group is lost. Therefore, RAID 0 is strictly recommended only for temporary data or scenarios where data loss is acceptable and maximum performance is the sole priority. For enterprise production environments, Huawei recommends RAID 5, RAID 6, or RAID-TP.

Huawei’s 3DC (Three-Data-Center) solution is designed for high-level business continuity, typically involving a local HA site and a remote DR site. The documentation supports three main topological configurations to meet different reliability and performance needs:

Cascading Network (Option B):Site A (Production) replicates to Site B (Local DR), and Site B then replicates to Site C (Remote DR). This reduces the pressure on the production site (Site A) as it only manages one replication link.

Parallel Network (Option C):Site A replicates directly to both Site B and Site C simultaneously. This provides better protection for the data at Site C, but increases the load and bandwidth requirements on Site A.

DR Star Network (Option A):This is a specific variant of the multi-site protection architecture used in Huawei'sHyperMetro + Remote Replicationscenarios. It typically combines an active-active setup between Site A and B with an asynchronous link to Site C, ensuring that even if two sites fail, the third contains a survivable copy of the data.

Huawei’s SmartQuota feature allows administrators to manage storage consumption at the directory, user, or user-group level using three types of thresholds:

Hard Quota (800 GB):This is a strict limit. Once the used capacity reaches this value, the storage system will immediately prevent any further write operations to that directory. Therefore, Option Dwilloccur.

Soft Quota (700 GB):This is a flexible limit combined with a grace period. When the limit is exceeded, the system issues an alarm butcontinues to allow data writesuntil the grace period expires or the hard quota is reached. Therefore, Option B willNOToccur.

Advisory Quota (600 GB):This is purely for monitoring and reporting. When reached, the system simply triggers an administrative alarm or notification; itnever restricts data writes. Therefore, Option C willNOToccur.

Option A is also correct because the directory is part of a 1 TB file system; it can never exceed the physical size of its parent container. Thus, only B and C are the actions that "will NOT occur."

Huawei’s new-generation OceanStor hybrid flash storage systems (such as the 5000 and 6000 series) provide high-density snapshot capabilities to ensure data resilience against logical errors or malicious attacks. According to the technical specifications for these systems, the minimum intervals for secure snapshots differ between file and block services.

ForSAN (Block) storage, the system can support high-frequency snapshots with a minimum interval of3 seconds. This low interval allows for near-continuous data protection, enabling recovery points that are extremely close to the moment of a failure or attack. ForNAS (File) storage, the minimum secure snapshot interval is15 seconds. While slightly longer than the SAN interval, this still provides superior granularity for file-level recovery compared to traditional backup schedules that often run only once per day or hour. These "HyperSnap" and "HyperCDP" features ensure that mission-critical applications can be rolled back to a healthy state within seconds, significantly reducing the Recovery Point Objective (RPO) for both structured and unstructured data.

The high-end OceanStor Dorado 18000 series is designed with the SmartMatrix 4.0 full-mesh architecture, which provides the industry's highest level of controller redundancy. In a standard configuration with 8 controllers (housed in two enclosures), the system can tolerate extreme failure scenarios without service interruption:

Individual Failures (Option A, C):The system easily handles the failure of one or two controllers as the remaining controllers take over the workload transparently.

Extreme Controller Failure (Option B):Due to the full-mesh interconnect where all controllers share a global memory cache and can access all backend disks, the system can tolerate the failure of up toseven out of eight controllers. As long as one controller remains active, services continue.

Enclosure Failure (Option D):Because the architecture is mirrored across controller enclosures, theentire failure of one controller enclosure(containing 4 controllers) is tolerated.

This level of resilience ensures that mission-critical applications remain online even in the face of catastrophic hardware events, maintaining 99.9999% availability.

Huawei’s OceanProtect backup storage solution is designed for the F2F2X (Flash-to-Flash-to-Anything) era. This concept represents a shift from the traditional Disk-to-Disk-to-Tape (D2D2T) backup model to a faster, more flexible architecture.

In the F2F2X model, data is backed up from the primary Flash storage (Dorado) to the dedicated backup Flash storage (OceanProtect) to ensure rapid backup and recovery. The "X" in F2F2X officially stands for "Anything," representing the final destination for long-term data retention or off-site disaster recovery. In the context of Huawei’s pre-sales training and hybrid cloud strategy,Cloud (Option A)is the primary "X" promoted to customers. By replicating backup copies to a public or private cloud (such as Huawei Cloud OBS), organizations can achieve cost-effective, long-term archiving and off-site protection without managing physical tape libraries. While "X" can technically be tape or another disk, the strategic emphasis for the new-gen solutions is the seamless integration with cloud ecosystems.