An administrator is attempting to protect 500TB of Windows file system data in a 4-hour backup window, when the file servers are idle. The daily change rate for the data is below 1%, and an Initial full backup has been performed to a high performance disk array configured as an Advanced Disk storage unit.
What can the administrator do to ensure subsequent backups complete within the backup window?
A NetBackup appliance is not restoring data from a specific backup file. What steps can be taken to troubleshoot the problem?
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media server showing offline
Which command can the administrator run to change the status of the media server?
Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH), under Settings > Security > Authentication, to configure and manage Network Information Service (NIS) user registration?
Which of the following resources can be used to analyze and optimize NetBackup performance?
A NetBackup backup job is taking longer than expected. What steps can be taken to troubleshoot the problem?
What is the name of the NetBackup feature that allows protection plans to execute faster than traditional backups, by creating a compact data stream that uses less network bandwidth?
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
What is the name of the command that lets you expire a backup image manually in NetBackup?
An administrator has a backup policy with the following policy attributes:
• 3 paths listed in the Backup Selections list
• 5 clients listed in the Clients list
• "Allow multiple data streams" is selected
• "Limit jobs per policy" is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to
handle the expected jobs?
How can you expire a backup image?
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple data streams enabled. One of the jobs has failed and is in an Incomplete state in the Activity Monitor.
How should the administrator verify the incomplete job runs prior to the next scheduled backup?
Which of the following is NOT a metric that can be monitored on NetBackup appliances?
Refer to the exhibit.
Which diagram is supported for backups spanning BasicDisk storage?
What is the name of the plug-in that performs deduplication on the NetBackup client or media server?
A NetBackup appliance is reporting a high disk usage. What steps can be taken to troubleshoot the problem?
How can you manually duplicate a backup image?
Which of the following backup solutions is used to create an exact image of a client's file system and store it on disk or tape media?
What is the benefit of using multiple data streams in NetBackup?
What is the name of the command that lets you view the status codes and their descriptions in NetBackup?
What is the benefit of using the staging schedule option in the Change Storage Units dialog box in NetBackup?
Refer to the Exhibit.
An administrator is trying to access client properties on the NetBackup Administration Console and receives the following message:
When checking the services on the master server, the administrator sees that the PBX service is down.
Which two commands can the administrator use to increase the PBX log level to determine the reason for the message above? (Choose two.)
A file system on a server that has different files changing daily becomes corrupt, and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below:
Monday: A full backup
Tuesday: A differential incremental backup
Wednesday: A cumulative incremental backup
Thursday: A differential incremental backup
Friday: A differential incremental backup
What is the minimum number of backup images that will be used to fully restore the server to its most current state?
Which type of workload assets are supported for malware scan?
What is required to implement Auto Image Replication?
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?
Which of the following is NOT a task that can be performed using Appliance Web Console?
What are the two ways to prioritize backup jobs in NetBackup?
Which of the following is NOT a function of Anomaly Detection?
An administrator has a master server running over 50,000 jobs per day.
What can the administrator do to reduce the load on the master server?
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes are frozen?
What is the name of the feature that allows NetBackup to deduplicate data across multiple domains or sites using optimized duplication?
An administrator is adding a new media server appliance to an existing NetBackup appliance master server.
What is the correct sequence to configure the new appliance in the NetBackup domain?
Which method is NOT able to provide performance information for previously run backup jobs?
What are the two commands that let you manage Fibre Channel devices using Appliance Shell Menu (CLISH)?
Which steps should an administrator perform to run an upgrade pre-check for multiple Windows and Linux clients using VxUpdate, without performing the upgrade?
What is the name of the NetBackup feature that lets you classify data based on its importance and manage it differently throughout each stage of its life?
Which utility is least helpful when troubleshooting network connectivity issues that exist between a media server and a client?
A NetBackup device has reported an error with the message "Media error: 0x00000001". What does this error mean?
What is the minimum supported version of NetBackup for upgrading to NetBackup 10.0?
How can an administrator locate NetBackup job activity using the appliance interfaces?
What is the name of the command that lets you list the backup schedules for a given policy in NetBackup?
Which of the following is NOT a way to troubleshoot problems with NetBackup appliances?
What is the name of the feature that lets you define different levels of access and permissions for NetBackup users and groups?
In which scenario is “Use Accelerator” unavailable in a backup policy?
What is the name of the feature that lets you use a smart card or a digital certificate for single sign-on (SSO) in NetBackup?
Which guide should be consulted to learn about the function and configuration of cloud storage in NetBackup?
An administrator has a master server named master1. When the administrator runs the bpclntcmd -pn command on the client, the administrator receives the following output:
bpclntcmd -pn
expecting response from master2
client_01.domain.com client_01 192.168.0.30 3815
What is a possible cause for this output?
Which of the following is not a supported platform for NetBackup client software?
Which of the following is NOT a role that can be assigned in NetBackup RBAC?
What are the two types of disk storage that NetBackup supports for backup data?
What is the benefit of using client-side deduplication over media server deduplication?
A backup job is showing the following error message:
Dec 5, 2018 4:11:02 PM - Info nbjm (pid=40455) starting backup job (jobid=369) for client WINTN3QANTSQ1B.vrtslab.br, policy Oracle_SO_Dedup, schedule FULL
Dec 5, 2018 4:11:02 PM -
Info nbjm (pid=40455) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=369, reque
st id:{201EBB46-F8B9-11E8-B5BA-A118CF05FA8E})
Dec 5, 2018 4:11:02 PM - requesting resource __ANY__
Dec 5, 2018 4:11:02 PM - requesting resource nbumasterapp.vrtslab.br.NBU_CLIENT.MAXJOBS.WINTN3QANTSQ1B.vrtslab.br
Dec 5, 2018 4:11:02 PM -
Error nbjm (pid=40455) NBU status: 2111, EMM status: All storage units are configured with On Demand Onl
y and are not eligible for jobs requesting ANY storage unit
All storage units are configured with On Demand Only and are not eligible for jobs requesting ANY storage
unit (2111)
Which two actions can an administrator perform to ensure the backup completes successfully? (Select two.)
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
An administrator has a media server with four empty disks with the following characteristics:
SSD1, SSD2: High-speed solid-state drives
Disk3, Disk4: Medium-speed hard drives
What is the recommended disk storage configuration using these devices?
An AdvancedDisk storage unit consistently reaches capacity, causing older, staged backups to expire.
How can the administrator control the prioritization of images that get removed?
How can you manage NetBackup disk and cloud storage?
What are the two types of reports that NetBackup provides to verify and monitor backup activities?
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully?
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
What are the two types of log files that record all activities related to NetBackup appliance security?
A NetBackup appliance is reporting a high network usage. What steps can be taken to troubleshoot the problem?
Which of the following is NOT a task that can be performed using Appliance Shell Menu (CLISH)?
What is the maximum age of the host's Certificate Revocation List (CRL) before communication with the host is prevented?
An administrator is performing a backup and receives the following error message:
129 Message: Disk storage unit is full
Which NetBackup command should the administrator use to report the potential free space of AdvancedDisk storage units?
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?
Backups are failing with status code 96 because tapes have NOT returned to the scratch volume pool after all the images on
the tapes have expired.
What may be preventing the media from returning to the scratch pool?
Where can an administrator configure cloud storage throttling?
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is greyed out and therefore unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
What are the different types of images that can be managed by NetBackup?
What is the purpose of the checkpoint restart feature in NetBackup?
Which command can an administrator run to test and analyze connections between master servers, media servers, and clients for multiple NetBackup ports?
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
Which command should an administrator run on each appliance as part of completing the pre-upgrade tasks?